SDR 11 HDPE pipe

SDR 11 HDPE pipe is a pressure-rated HDPE water pipe commonly used where PN16-class reference, welded joints and long buried service are important.

  • Raw Materials: PE100, PE4710, PE100RC
  • Diameter range: DN20mm-DN1800mm (2 inch-71 inch)
  • SDR options: SDR17, SDR13.6, SDR11, SDR9
  • Pressure classes: PN10, PN12.5, PN16, PN20
  • Length: 5.8m, 11.8m, or custom project lengths
  • Supply free sample, OEM service, and fast quotation support

Product Description

SDR 11 HDPE pipe is a pressure-rated HDPE water pipe commonly used where the project needs a stronger wall class with reliable welded joints for buried or exposed service. Buyers often review it together with HDPE fittings when the system is being planned as a complete pressure pipeline.

Typical applications

This pipe is widely used in municipal water transfer, plant distribution lines and other utility routes where the designer is comparing SDR class as part of the pressure selection. On larger water supply applications, SDR11 is often checked against the route length, working pressure and branch arrangement before the final wall class is chosen.

Why choose SDR 11 HDPE pipe

The main reason buyers choose SDR11 is that it provides a heavier wall reference than lighter SDR classes while still keeping the corrosion resistance and flexibility associated with HDPE. It is also commonly reviewed alongside electrofusion fittings when the project expects buried branches or repair tie-ins in the same system.

Specifications

Product SDR 11 HDPE pipe
Material PE100 / PE100RC
Size range DN20-DN1800mm
Pressure / class PN6 / PN10 / PN16 / PN25
Standard ISO 4427 / EN 12201 / ASTM
Connection Butt fusion / electrofusion
Reference SDR / class SDR11
Reference pressure PN16 typical reference
Supply length 6m / 12m / custom / coil options
Colour Black with blue stripes
Main application Pressure water transfer and distribution systems

SDR 11 HDPE pipe Size Chart (PE100, PN16, EN 12201 / ISO 4427)

SDR11 means the outside diameter is 11 times the wall thickness (SDR = OD ÷ wall). For PE100 this wall class corresponds to a working-pressure rating of PN16 for water at 20 °C. The chart lists the standard wall thickness for every outside diameter supplied in SDR11.

Outside diameter (mm) Nominal size Wall thickness SDR11 / PN16 (mm)
20 DN15 / 0.5″ 2.0
25 DN20 / 0.75″ 2.3
32 DN25 / 1″ 3.0
40 DN32 / 1.25″ 3.7
50 DN40 / 1.5″ 4.6
63 DN50 / 2″ 5.8
75 DN65 / 2.5″ 6.8
90 DN80 / 3″ 8.2
110 DN100 / 4″ 10.0
125 — 11.4
140 DN125 / 5″ 12.7
160 DN150 / 6″ 14.6
180 — 16.4
200 — 18.2
225 DN200 / 8″ 20.5
250 — 22.7
280 DN250 / 10″ 25.4
315 DN300 / 12″ 28.6
355 DN350 / 14″ 32.2
400 DN400 / 16″ 36.3
450 DN450 / 18″ 40.9
500 DN500 / 20″ 45.4
560 — 50.8
630 DN600 / 24″ 57.2

Every diameter shares the same SDR11 ratio, so the whole range keeps a consistent PN16 rating from OD20 to OD630 (larger on project order). Walls follow the minimum wall of EN 12201-2 / ISO 4427; mean wall is produced slightly above minimum. Common service: PE gas distribution.

Where PN16 / SDR11 is specified

Jointed with matching SDR11 HDPE fittings by butt fusion or electrofusion. Confirm size range, working pressure and joint method before ordering.

Quality Assurance

Each batch is checked for raw material consistency, appearance, outside diameter and wall control so the SDR reference can remain more stable during installation and service.

Packaging & Delivery

Depending on diameter and project requirements, SDR11 pipe can be supplied in coils or straight lengths, with loading arranged for easier transport and site unloading.

Why Choose Puhui

Puhui helps buyers compare SDR class, size range and matching fittings together, which is useful when the project is balancing several HDPE pressure classes in one order.

FAQ

Q: What is SDR 11 HDPE pipe usually used for?
A: It is commonly used for pressure water transfer and distribution routes where a stronger wall class is required.

Q: Why do buyers compare SDR11 with other SDR classes?
A: The SDR class affects wall thickness and pressure selection, so it is normally reviewed as part of the pipeline design.

Q: Is PN16 a typical reference for SDR11?
A: Yes, SDR11 is often associated with a PN16-style reference in many HDPE water applications.

Q: What should be confirmed before ordering?
A: Confirm the size range, pressure class, joint method and project standard before finalizing the order.

Product Specification

Item HDPE pipe
Material PE100 / PE4710 / PE100RC
Size Range DN20-DN1800
Pressure PN10 / PN12.5 / PN16 / PN20
SDR SDR17 / SDR13.6 / SDR11 / SDR9
Length 5.8m / 11.8m / custom project lengths

Product Certificate

ISO 4427 (BV) ISO 4427 (BV)
EN 12201 (BV) EN 12201 (BV)
WRAS Water Regulations WRAS Water Regulations
NSF 61 (Potable Water) NSF 61 (Potable Water)

Product Recommend

Send Your Inquiry

Tell us the size, SDR / pressure class and quantity you need and we will reply with a quotation. Prefer email? Write to ph.quote@phtopindustry.com.

Email WhatsApp Contact Us Back to Top