SDR 17 HDPE pipe

SDR 17 HDPE pipe is an HDPE pressure pipe for municipal water supply, plant water distribution, building service lines. It is widely used on water projects that need a durable welded system with low maintenance over l...

  • Raw Materials: PE100, PE4710, PE100RC
  • Diameter range: DN20mm-DN1800mm (2 inch-71 inch)
  • SDR options: SDR17, SDR13.6, SDR11, SDR9
  • Pressure classes: PN10, PN12.5, PN16, PN20
  • Length: 5.8m, 11.8m, or custom project lengths
  • Supply free sample, OEM service, and fast quotation support

Product Description

Product introduction

SDR 17 HDPE pipe is an HDPE pressure pipe for municipal water supply, plant water distribution, building service lines. It is widely used on water projects that need a durable welded system with low maintenance over long service periods, and it is often planned together with HDPE fittings so the whole network keeps the same jointing method.

How SDR17 compares

This family is commonly selected when projects need pressure-rated HDPE pipe with proven long-term performance and full compatibility with fusion-installed systems. For SDR17, the typical reference pressure is Gas distribution class.

Typical applications

SDR 17 HDPE pipe is typically used in municipal water supply, plant water distribution, building service lines. In larger water supply applications, SDR class, welding method and branch arrangement are usually reviewed together before the line is finalized.

Selection & procurement notes

Confirm the operating pressure, SDR class, installation method and related fittings before ordering so the pipe wall, coil or straight length and joint method match the project design.

SDR17 (wall = OD ÷ 17) reference walls

Product SDR 17 HDPE pipe
Material PE100 / PE100RC
Size range DN20-DN1800mm
Pressure / class PN6 / PN10 / PN16 / PN25
Standard ISO 4427 / EN 12201 / ASTM
Connection Butt fusion / electrofusion
Reference SDR / class SDR11 / SDR17 / SDR21
Supply length 6m / 12m / custom
Colour Black with blue stripes
Main application Municipal water supply, plant water distribution, building service lines
SDR class SDR17
Reference pressure Gas distribution class

SDR 17 HDPE pipe Size Chart (PE100, PN10, EN 12201 / ISO 4427)

SDR17 means the outside diameter is 17 times the wall thickness (SDR = OD ÷ wall). For PE100 this wall class corresponds to a working-pressure rating of PN10 for water at 20 °C. The chart lists the standard wall thickness for every outside diameter supplied in SDR17.

Outside diameter (mm) Nominal size Wall thickness SDR17 / PN10 (mm)
25 DN20 / 0.75″ 1.5
32 DN25 / 1″ 2.0
40 DN32 / 1.25″ 2.4
50 DN40 / 1.5″ 3.0
63 DN50 / 2″ 3.8
75 DN65 / 2.5″ 4.5
90 DN80 / 3″ 5.4
110 DN100 / 4″ 6.6
125 — 7.4
140 DN125 / 5″ 8.3
160 DN150 / 6″ 9.5
180 — 10.7
200 — 11.9
225 DN200 / 8″ 13.4
250 — 14.8
280 DN250 / 10″ 16.6
315 DN300 / 12″ 18.7
355 DN350 / 14″ 21.1
400 DN400 / 16″ 23.7
450 DN450 / 18″ 26.7
500 DN500 / 20″ 29.7
560 — 33.2
630 DN600 / 24″ 37.4

Every diameter shares the same SDR17 ratio, so the whole range keeps a consistent PN10 rating from OD20 to OD630 (larger on project order). Walls follow the minimum wall of EN 12201-2 / ISO 4427; mean wall is produced slightly above minimum. Common service: water supply and distribution.

Where PN10 / SDR17 is specified

Jointed with matching SDR17 HDPE fittings by butt fusion or electrofusion. Confirm size range, working pressure and joint method before ordering.

Quality Assurance

Each batch of SDR 17 HDPE pipe is checked for raw material consistency, appearance, outside diameter, wall thickness and other routine quality points required for the product standard. This helps keep the product performance stable during installation and service.

Packaging & Delivery

Smaller HDPE sizes can be supplied in coils, while larger sizes are commonly shipped in straight lengths such as 5.8m, 11.8m or 12m. Loading is matched to size range and container planning so handling and onsite unloading stay practical.

Why Choose Puhui

For HDPE pipe supply, Puhui focuses on stable specifications, matched welding-system compatibility and practical packing arrangements for export orders. This makes it easier for buyers to compare pipe class, joint method and shipment planning in one place.

FAQ

Q: What size range is available?
A: SDR 17 HDPE pipe is commonly supplied within DN20-DN1800mm, with the final selection based on the project design and matching connection parts.

Q: Which standards does it follow?
A: The reference specification for this product family follows ISO 4427 / EN 12201 / ASTM.

Q: How is it connected?
A: Typical connection methods for SDR 17 HDPE pipe include Butt fusion / electrofusion.

Q: Where is it usually used?
A: SDR 17 HDPE pipe is commonly used for municipal water supply, plant water distribution, building service lines.

Q: What should be checked before ordering?
A: Review the required size, service condition, connection layout and the related system parts before confirming the order.

Product Specification

Item HDPE pipe
Material PE100 / PE4710 / PE100RC
Size Range DN20-DN1800
Pressure PN10 / PN12.5 / PN16 / PN20
SDR SDR17 / SDR13.6 / SDR11 / SDR9
Length 5.8m / 11.8m / custom project lengths

Product Certificate

ISO 4427 (BV) ISO 4427 (BV)
EN 12201 (BV) EN 12201 (BV)
WRAS Water Regulations WRAS Water Regulations
NSF 61 (Potable Water) NSF 61 (Potable Water)

Product Recommend

Send Your Inquiry

Tell us the size, SDR / pressure class and quantity you need and we will reply with a quotation. Prefer email? Write to ph.quote@phtopindustry.com.

Email WhatsApp Contact Us Back to Top